Manufacturer:
Progressive Dynamics Medical,
Inc.
507 Industrial Road
Marshall, MI 49068
Phone: 269-781-4241
Fax: 269-781-7802
Internal Sales Coordinator:
Date device was introduced
to the market: 1992Shipping point:
f.o.b. Marshall,
Michigan
Terms: 1% 20 Days, Net 30
PDI Contract
Manager: Thomas H. Phlipot,
General Manager
Phone: 269-781-4241
Fax: 269-781-7802
Product
Liability Insurance: $10,000,000
Application: For use in Pre-op, O.R. and PACU.
Physical
Dimensions: 23.5" H x 20.5" D x 20.5" W
Weight: 35 lbs
Description
of mechanism for temperature control: Solid State, zero crossing,
duty cycle control.
Operating
temperatures: Ambient, 27° C (80° F), 32° C (90° F), 38° C
(100° F)
and 43° C (110° F).
Time system
takes to warm to
38° C (100° F): Three to four minutes.
Leakage
current: Less than 100µa. Typical 50µa.
Blower motor:
Low noise Squirrel cage/3200 RPM free flow/135 CFM free flow
Heating
element: 700
watt sealed, low leakage, tube and fin type.
Thermostat:
Solid state electronic.
Electrical
requirements: Input
voltage = 120 VAC/60hz at 7 amps or 230 VAC/50hz at 4 amps.
Alarm system: There are several alarm systems
incorporated in unit.
See "Heater/Blower Safety Features" for more information.
Safety features: Described in detail in "Heater/Blower
Safety Features" section.
Hose description: Standard hose length 2.75"
diameter x 60" long.
HEPA Filtration
system: > 95% at 0.2 micron
Air delivery
system: Hose connected to warming cover.
Lower surface of cover has Trocar cuts.
Outline
of self diagnostics feature: A built-in self-test
and diagnostic feature
allows the operator to test the over temperature safety feature by simply
pressing a button located on the bottom of the unit. Pressing this button
will place the unit in the "TEST MODE" which will disconnect
the heater control circuitry and drive the output temperature into the
over temperature range. Once output temperature reaches the "Red"
area on the bar graph temperature indicator, both "Audible"
and "Visual" temperature alarms will be activated. The system
will them automatically disconnect power to the heater element, the temperature
will return to the selected safe area, and the alarms will shut off.
Patient Warming Devices
Heater/Blower Safety Features
UL listed to meet UL544 requirements.
CSA certified. |
